Skip to content

Ruijie Networks Administration

intermediate 40 hours 5 modules 15 lessons 5 assessments Final exam 4 practical tasks Certificate valid 2 years

About this course

Configure and operate Ruijie enterprise networks: RGOS command line, VLANs and trunks, spanning tree, inter-VLAN and OSPF routing, controller-based and cloud-managed wireless, security features, and day-to-day operations with Ruijie Cloud.

What you will be able to do

  • Navigate the RGOS CLI and manage configuration files safely
  • Configure VLANs, access and trunk ports, and link aggregation
  • Protect a switched network with RSTP/MSTP, BPDU guard, and port security
  • Route between VLANs with SVIs and build single-area OSPF
  • Deploy Ruijie wireless with secure SSIDs and good roaming
  • Manage, monitor, back up, and upgrade devices with Ruijie Cloud

Curriculum

365 min of reading
  • 1
    Ruijie product families and RGOS
    Preview 20 min
  • 2
    Initial device setup
    25 min
  • 3
    Managing configurations and firmware
    20 min
  • Q
    Module assessment: RGOS Fundamentals
    5 questions · pass 80%
  • 1
    VLANs, access ports, and trunks
    30 min
  • 2
    Spanning Tree Protocol (STP, RSTP, MSTP)
    30 min
  • 3
    Link aggregation and port security
    25 min
  • Q
    Module assessment: Switching: VLANs, Trunks & Spanning Tree
    5 questions · pass 80%
  • 1
    Inter-VLAN routing with SVIs
    25 min
  • 2
    Static routing and OSPF
    30 min
  • 3
    DHCP services
    20 min
  • Q
    Module assessment: Routing with Ruijie
    5 questions · pass 80%
  • 1
    Wireless planning and AP deployment
    25 min
  • 2
    SSIDs, security, and guest access
    25 min
  • 3
    Roaming, band steering, and optimisation
    20 min
  • Q
    Module assessment: Ruijie Wireless
    5 questions · pass 80%
  • 1
    Ruijie Cloud management
    20 min
  • 2
    Monitoring, logging, and QoS
    25 min
  • 3
    Troubleshooting methodology
    25 min
  • Q
    Module assessment: Network Management & Troubleshooting
    5 questions · pass 80%

Final exam

20 questions including field scenarios and image questions · 30 minutes · pass mark 80%. Unlocks when every lesson and module assessment is complete.

Locked

Practical sign-off

Hands-on tasks a supervisor must watch you complete and sign off before your certificate is issued.

  • 1

    Build a Ruijie access switch from factory default

    Hostname, accounts, SSH, management VLAN, NTP, and saved configuration.

  • 2

    Configure VLANs, a trunk, and an LACP aggregate port

    Verify with show vlan, show interfaces switchport, and show aggregatePort summary.

  • 3

    Route between VLANs and restrict traffic with an ACL

    Prove allowed and denied flows with ping.

  • 4

    Deploy and test a secure SSID with roaming

    WPA2/WPA3, VLAN mapping, and a walk test between two APs.